Searching in stories... |
Timeline |
Options
|
|
||
|
||
|
||
Show the latest entries |
||
Searching in stories... |
Timeline |
Sometimes incorrectly called Gerald, Jerry Vultee made his debut with John K. Northrop, whom he succeeded at Lockheed before creating his own aircraft in 1931. He disappeared accidentally in January 1938, just two months after the creation of Vultee Aircraft. The Vultee Aircraft Corporation became an independent company in 1939 in Los Angeles County, California. It had limited success before merging with the Consolidated Aircraft Corporation in 1943, to form the Consolidated Vultee Aircraft Corporation − or Convair.
In 1912, Jerry Vultee's family moved to Ocean Park, California, where he attended Cal Tech between 1921 and 1923, studying aviation techniques. He even designed and built a full-sized aircraft as his student project.
In 1923, Art Mankey, who was then in charge of engineering at Douglas Aircraft, hired Vultee as a structural aeronautic engineer. Also at Douglas was Jack Northrop who was working on an idea for a commercial aircraft, the Vega. Jerry Vultee designed and supervised building of the Sirius as well as the first adaptations of NACA cowlings on commercial aircraft.
After the bankruptcy of Detroit Aircraft Corporation, that had bought Lockheed in 1929, Jerry Vultee taught briefly at the Curtiss-Wright Technical Institute in Glendale and became chief engineer at Emsco Aircraft, a post he resigned in September 1931.
Gerard "Jerry" Freebairn Vultee (1900–1938) and Vance Breese (1904–1973) started the Airplane Development Corporation in early 1932 after American Airlines showed great interest in their six-passenger V-1 design. Soon after, Errett Lobban (E.L.) Cord bought all 500 shares of stock in the company and the Airplane Development Corporation became a Cord subsidiary.
Due to the Air Mail Act of 1934, AVCO established the Aviation Manufacturing Corporation (AMC) on November 30, 1934 through the acquisition of Cord's holdings, including Vultee's Airplane Development Corporation. AMC was liquidated on January 1, 1936 and Vultee Aircraft Division was formed as an autonomous subsidiary of AVCO.
Jerry Vultee was named vice president and chief engineer. Vultee acquired the assets of the defunct AMC, including Lycoming Engines and Stinson Aircraft Company.
Meanwhile, Vultee and Breese had redesigned the V-1 to meet American Airlines' needs and created the eight-passenger V-1A. American purchased 11 V-1As, but the plane ultimately failed due to safety concerns about a single-engine plane and the advent of the twin-engine Douglas DC-2s and DC-3s. Vultee redesigned the V-1 into the V-11 attack aircraft for the United States Army Air Corps, but it received few initial orders.
By 1937 Jerry was heading his own factory in Downey, California with more than a million dollars in orders for V-1s, V-1As and V-11s.
In 1938, before he could see Vultee become an independent company, Jerry Vultee and his wife Sylvia Parker, the daughter of Twentieth Century Fox movie director Max Parker, died when the plane he was piloting crashed in a snowstorm near Sedona, Arizona. A bronze plaque memorializing the Vultees is located at the end of Coconino Forestry trail named in honor of Vultee Arch, a natural rock arch near the site of the plane crash near Sedona, Arizona. It is reached via a 5-mile jeep trail, followed by a 2-mile hike (one way) on a well-used trail. The Vultee Arch Trail goes to a viewpoint for the arch. Donald P. Smith, Jerry Vultee's close friend and Vice President of Vultee Aircraft, wrote a letter to TIME magazine about Jerry's death:
Sirs:
''Gerard F. Vultee ("Jerry"), not Gerald, my close friend and business associate for many years, was killed when the cabin monoplane he was flying with Mrs. Vultee crashed on the flat top of Wilson Mountain [TIME, Feb. 7]. ... Caught in a local snow-storm and blizzard with no training in blind or instrument flying, he was unable to find his way out. The fire occurred after the crash, not before."
DON P. SMITH Vice President
AVCO hired Dick Palmer away from Howard Hughes to take Jerry Vultee's place, and Vultee Aircraft Division began to develop military designs. Dick Palmer created the BT-13, BT-15, and SNV Valiant trainers and oversaw other major production program such as the V-72 Vengeance, serving in the USAAC as the A-31 and A-35.
Vultee Aircraft was created in November 1939, when Vultee Aircraft Division of AVCO was reorganized as an independent company.
The P-66 Vanguard was a 1941 fighter program that was intended for Sweden that was inherited by the USAAC, Great Britain and finally, China. The P-66 had a mediocre combat record in China and was out of service by 1943. The XP-54 fighter project was the last Vultee Aircraft design, but only two examples were built.
Vultee was the first company to build aircraft on a powered assembly line, and the first to use women workers in production-line positions.
On March 17, 1943, Consolidated and Vultee officially merged, creating Consolidated Vultee Aircraft Corporation, popularly known as Convair. The Vultee management resigned.
— — — = = — — —
![]() |
You choosed to show only the famous things! (Via the Options menu)